The shareholder register in Boardeaser is built as a chronological chain of action events, where each action consists of one or more transactions. This guide explains how the action chain works, how to unlock and edit an action or number series, how to remove incorrect actions, and how to update details for existing shareholders.
Key rules for the action chain:
- Lock the previous action: The most recent action must be locked before the New action button becomes active. If the button is grayed out, open the Actions tab and click Lock on the latest event.
- Only the most recent action can be edited or deleted: Because every action builds directly upon the previous one, you can only unlock, edit, or delete the latest action. To modify an earlier event in the history, all subsequent actions must first be deleted in reverse chronological order.
Table of contents
- 1. How action events and attachments work
- 2. Unlock and edit an action (including number series)
- 3. Delete an action event
- 4. Edit shareholder details
1. How action events and attachments work
Every change in share capital or ownership is logged chronologically as an action event. (If the register was created by adding current shareholders only, an "Added owners" action is generated automatically.)
- Click Shareholder Register in the left menu and click New action in the top-right corner.
- Select the action type, date, and affected share type. Attach supporting documents (such as agreements or meeting minutes) and enter notes if needed, then click Create action.
- Add the relevant transactions via New transaction, then open the Actions tab and click Lock to finalize the event and prepare the register for future actions.
See detailed step-by-step guides for specific action types:
- Record a share sale or transfer in the shareholder register
- Record a new share issue, bonus issue, split, and convertible redemption
2. Unlock and edit an action (including number series)
If you need to adjust the date, share count, attachments, or number series in the most recent action:
- Go to Shareholder Register in the left menu and open the Actions tab.
- Click Unlock next to the most recent action at the top of the list and confirm by clicking Unlock in the dialog.
- Click the three-dot icon (···) to the right of the unlocked action and select Edit (you can also select New action here to add another transaction to the same event).
- Make your changes and click Save. Remember to click Lock again once finished.
Edit number series in the shareholder register
A share number series can only be edited in the most recent action event following the steps above. If a number series needs to be adjusted in an earlier historical action, all subsequent actions must first be removed (see section 3 below), after which you can unlock and edit the target action and re-enter the following events.
3. Delete an action event
If the latest action was entered incorrectly—or if you need to step back through the history to modify an earlier event—delete actions one at a time starting with the newest:
- Go to Shareholder Register in the left menu and open the Actions tab.
- Click Unlock on the most recent action and confirm by clicking OK.
- Click the three-dot icon (···) to the right of the action, select Remove, and confirm by clicking Remove.
Once the action is removed, you can unlock and edit or delete the next action in the list if needed. (Want to clear the entire register? See the guide Delete and reset the share register.)
4. Edit shareholder details
To update contact details, addresses, or identification/registration numbers for an existing shareholder, edit them directly under the Shareholders tab—no action unlocking is required:
- Go to Shareholder Register in the left menu, open the Shareholders tab, and click the name of the shareholder you want to update.
- Update the details and click Save.